By means of the Static Plate Load Tester HMP PDGpro immediately after test procedure the deformability and the load capacity of the soil as well as the quality of the construction work can be assessed and documented on the construction site.
To carry out the test a counterweight of at least 5 t is required. Set up and test procedure can be done by one person. The handling of the measuring instrument is comfortable and very user-friendly. Faulty measurements are almost impossible when handled properly.
The pure test procedure according to DIN 18134 with 15 loading stages takes about 30 minutes and allows immediate conclusions on the load capacity and deformability of soils down to the depth of twice of the load plate diameter. By specifying the GPS coordinates, the measuring point is recorded.
The Static Plate Load Tester HMP PDGpro is a high-precision measuring instrument for professionals
The measuring frame and all accessories can be safely stored within the massive carrying cases. Due to latest technology, the evaluation unit is small, handy, unbeatably easy and comfortable to use. The measuring device is of course splash-water proof to work even under bad weather conditions. All parts of the tester are also surface sealed.
Bright red measuring frame
Automatic evaluation unit
Reliable and precise
No problem, the movie on the supplied USB stick explains the test procedure within a few minutes - always available and quickly retrievable.